At Techno (Industrial Division ) we currently design, develop, assemble and produce following kind of Lab Equipment’s and other products. We have lined few of them. A team of skilled and qualified personals involve in this process for error less products and service. For your any kind of requirement of such items, please feel to call us or send us a mail, we will definitely get back to you within 24 hours. Each product is tested for at least 1 week before we dispatch them. Each product is also packed in wooden box. to avoid breakage.
Laboratory Incubator Model : LI 1001
Incubators are used in modern research laboratories to maintain a stable environment for processes such as growing cells and microbiological cultures and incubating antibodies and cells for fluorescence microscopy. In all kind of research laboratories, now-a-days Incubators are widely used to maintain stable environment for processes such as cell growing and cultures process of microbiological. Its also used in incubating antibodies and cells.
Some of salient features of our Laboratory incubators are : Power consumption : 220 VAC +/- 10% 50HZ, Interior Polish stainless steel of 304 grade sheet, High and low temperature setting, Proper Heat insulation, Short circuit protection, Digital indication, Temp. : 70 Degree. Long lasting and low power consumption.
Humidity Cabinet HC 1003
Humidity Cabinets provides an environment for a wide range of biological testing applications. These humidity cabinets are designed to duplicate a natural condition, which allows testing the limitations of a sample when exposed to various temperature and moisture.
Digitally controlled temperature and humidity in approximate ranges of 35-70°C and 40- 95%RH, respectively. Humidity is maintained by utilizing a low-pressure water vapor. Uniform temperature and humidity are maintained using the same horizontal air flow employed in the cabinet. Temp. Range 35ºC to 70ºC Relative Humidity Percent Ambient + 15% to 90% Interior Polish stainless steel of 304 grade sheet Power consumption : 220 VAC +/- 10% 50HZ, Short circuit protection, Digital indication, Long lasting and low power consumption.
laboratory refrigerators(Lab freezers) Model : LFR 1001
We produce general-purpose laboratory refrigerators which are normally designed for the demanding requirements of daily use in research in all biochemical laboratories. The body can be SS or MS (Powder coated color) There will be a front window to see inside materials. The temperature can be set using a digital controlled temperature controller. Normally these refrigerators come in 50 / 100 /150 /200 liters capacity. SS racks are provided for easy use. Strong door handles. Long lasting compressors are used. Input voltage : 180 to 220 VAC / 50 hz single phase. Cooling : according to customer need. Normal is + 2 to +15 degree C / – 10 and –20 degree C . Watts upto 500. Efficient refrigeration design for optimum cooling performance. CFC- and HCFC – FREE
·
Magnetic Stirrer Model MS 10011
Our magnetic stirrer is a laboratory device that employs a rotating magnetic field to cause a stir bar immersed in a liquid to spin flowlessly.
Its an table top model with control panel on front. It comes with long 2 meter heavy duty cables
Single plate and double plate model available
Perfect for stirring in scientific research, industry, agriculture, health and medicine, homebrew, etc
Adjustable stirring speed, speed regulation up to 1500 rpm
Input voltage : 220 VAC +/- 10 % 50 HZ
Wattage : Upto 700 watt
Easy operations.
Heating Pump Model : HT 1001
Our heating pumps takes the available heat from the (water/oil) heating unit. The output liquid is delevered to required unit. And the process is repeated and heated water or oil are continuously delivered to required unit.
SS 304 and Brass. Highest RPM 1500. Heat upto 200 degree celcious. Input voltage : 220 VAC. 50 HZ. 400 watt. Capacity : 2 liters.
Vacuum Pump Model : 2SD –36 & 2SD – 37
Vacuum pumps are mechanical devices that enable the removal of air and gas molecules from a sealed filtration bottle to create an area devoid of air and/or gas. Generally. Its mostly used to clean and filtration process. Our Vacuum pumps come dry variants. No oil required.
Vacuum : 27 inch HG. Capacity 30 LPM . Pressure 30 PSL. HP 0.5 . In put volt : 220 VAC. 50 HZ. 400 watt. Capacity.
* Filtration flask is not part of this pump.
Stirrer Speed Control Unit Model : 1500
Our Most laboratory stirrers speed control units provides a speed range, such as 10-2000 rpm or 40-6000 rpm. The speed can be controlled by rotary controls. In. In put volt : 180-240 VAC. 50 HZ. 750 watt. Capacity. Out put 3 phase for 3 phase motors.
LED Speed indication. On Off switch/ MCBs for protection. Cab be used for 12 hrs continuously.
Heat exchanger Model : 3000
Our heat exchanger transfers heat from one medium to another, hot oil or hot water can be circulated continuously. In built long lasting heating pump. In put volt : 220- 240 VAC. 50 HZ. 3000. Front Water / Oil indicator.
Complete unit is made of SS 304 and SS 316. Wheels for easy movement.
LED heat indication and control system. On Off switch/ MCBs for protection. Cab be used for 6 hrs continuously.
Re-circulating chiller: Model : CH 10 / CH 20 / CH 40 / CH 80
We have range of Laboratory Chiller, which are available in various sizes and shapes. These are used to re-circulating low temperature. These are table top models and economic. The entire body is either MS or SS 304. For MS models, power coating colors is done. Imported compressors are used for great efficiency. Best quality condenser is used to ensure flawless service.
Operating voltage 180-240 VAC. 50 HZ. Watt : 500 to 2000 watt. LED indication for temperature and settings. On Off switch/ MCBs for protection. Cab be used for 12 hrs continuously. Temperature range : various models available – 10 degree / -20 degree / – 40 degree / -80 degree calicoes. Easy-to-clean stainless steel mesh filter high quality insulated 4 bath reservoir.
Fully made in India Product. .
Freeze Dryer or Lyophilizer Model : LP 40 / LP 80 / -100
Freeze drying (Lyophilisation), is a low temperature dehydration process. In this process first of all the product is freeze, while lowering pressure, after that the ice is removed by a sublimation process. Our freeze dryers are available in many design and shape. .
Operating voltage 180-240 VAC. 50 HZ. Watt : 1000 to 2000 watt. Temperature range : -40 / -80 / -100 degree C. LED indication for temperature and settings. . On Off switch/ MCBs for protection. Various models available – 20 degree / -40 degree / – 80 degree / -100 degree Celsius. Easy-to-clean stainless steel mesh filter.
No of drying port : 12 / 16/ 24 / 32 or as per customer need
*The specification can be changed as per customer actual requirement. This product cab be customized as per actual need also. Data transfer and notification on mobile app, at extra cost.
Lab Drying oven Model : WV 50 / WV 70 / WV 80
A drying oven is a type of low-temperature forced air oven used primarily in laboratory settings. All kind of Specimens, various tools and temperature-sensitive chemicals are kept inside a drying oven to slowly and evenly remove moisture. It can reduce or remove moisture completely. All MS housing, with good quality heating elements. Inside Fan for heat circulating. MS or SS 304 racks. Wheels for easy movements. LED indication for temperature and settings. On Off switch/ MCBs for protection. Cab be used for 24 hrs continuously. Various models available 50 degree / 70 degree / 80 degree calicoes. Operating voltage 220-240 VAC. 50 HZ. Watt : upto 2000 watt.
*The specification can be changed as per customer actual requirement,
Plant Extraction Unit Model : PT 1000
Plant extraction unit is used to extract some vital materials from plants such as essential oils etc. Its made of SS 304 . There is a Stirrer system in this unit. Its fitted near the tank. Can be adjuster or shifted with latest state of art technology. All moving parts are made in latest CNC machines. There are two option of this model one is with heating arrangement and another is without heating attachment. LED indication for temperature and settings. .
On Off switch/ MCBs for protection. Cab be used for 24 hrs continuously. Stirrer speed 10 to 1000 ( programmable). Operating voltage 220-240 VAC. 50 HZ. Watt : upto 2000 watt.
*The specification can be changed as per customer actual requirement,
Magnetic Stirrer Model SS 10011DUAL
Our Heating Mantle is a kind of laboratory device that employs a rotating magnetic field to cause a stir bar immersed in a liquid to spin flawlessly. There are two sent of heating cum megnetic plate on top, so that you can operate two separate work at a time !! Its a innovative product.
There are control panel on front. Temperature can be set digitally with set point and actual temperature display. Stirrer speed can be controlled easily from front panel. It comes with long 2 meter heavy duty cables
Perfect for stirring in scientific research, industry, agriculture, health and medicine, homebrew, etc
Adjustable stirring speed, speed regulation up to 1000 rpm
Input voltage : 220 VAC +/- 10 % 50 HZ
Wattage : Upto 700 watt
Easy operations.
Techno Aid
( Industrial Division)
21, Thakur para lane
Helabattala, (Baguiati Area)
Kolkata.
Pin : 700059
Phone : 9830210981 / 033-25721243
aid_techno@yahoo.com
enquiry@technoaidindustrial.com
Social Media Links
Coming soon